Metal Roof Coating
If your metal roof is showing rust, faded paint, or leaks at the seams and fasteners, a professional metal roof coating can seal and protect it for a clean, uniform, reflective finish. Bryer and Sons applies high-quality coating systems designed for standing-seam and R-panel metal roofs across Texas.
Call us at 1-800-385-8598 — we're here 7am–8pm to talk through your roof.
What Our Metal Roof Coating Service Covers
We coat standing-seam and R-panel metal roofs on homes, barns, shops, and commercial buildings. Every job starts with a close look at the panels, fasteners, seams, flashing, and any spots where rust has started. We treat rust, seal the seams and fastener heads, and apply a coating system made for metal — not a generic paint.
This service is a good fit when your metal roof is structurally sound but showing its age: surface rust, a chalky or faded finish, small leaks at screws or overlaps, or a roof that runs too hot in the summer.
Coating Systems for Metal Roofs
We work with two proven coating types for metal roofing, and we'll recommend the right one after seeing your roof:
Aluminum roof coatings — These carry aluminum flakes that leave a bright, reflective silver finish. They're a strong match for metal roofs because they reflect sunlight, help the surface run cooler, and give aging panels a clean, uniform look.
Elastomeric roof coatings — These form a thick, flexible, seamless membrane over the metal. They move with the panels as temperatures change, seal around fasteners and seams, and hold up in low spots where water sits.
Both go on only after proper prep: rust treatment, seam and fastener sealing, and a clean, dry surface. That's what makes the coating bond and perform.
Benefits of Coating Your Metal Roof
- Reflects heat — A bright coated surface reflects sunlight instead of absorbing it, so the roof runs cooler and your building stays more comfortable.
- Stops leaks at the source — Sealed seams and fastener heads shut down the small leaks that plague aging metal roofs.
- Fights rust — Rust treatment plus a protective coating keeps corrosion from spreading across panels.
- Better curb appeal — A fresh, uniform coating makes an older metal roof look clean and well-kept again.
- Straightforward upkeep — A coated roof is easier to inspect and touch up than bare, weathered metal.
Our Metal Roof Coating Process
- Inspection — We walk the roof, check panels, seams, fasteners, and flashing, and note rust spots and leak points. You'll get a straight answer on whether coating is the right call.
- Cleaning and prep — We clean the surface, treat rust, and seal seams and fastener heads so the coating has a sound surface to bond to.
- Application — We apply the coating system evenly across the roof, working around penetrations, flashing, and trim for a clean, consistent finish.
Metal Roofs and Texas Weather
Texas heat is hard on metal roofs. Dark or weathered panels soak up sun all day, and the constant expansion and contraction works fasteners loose and opens up seams. Add Gulf humidity and driving rain, and rust starts at every scratch and screw head.
A reflective coating helps on both fronts: it bounces sunlight off the roof so the surface runs cooler, and the sealed, coated surface stands up better to moisture. If your metal roof bakes every summer and shows rust at the fasteners, coating is worth a look.
-
Surface rust gets treated before we coat. We clean the area, apply a rust treatment, and seal it so the coating bonds properly. If any panels are rusted through, we'll tell you straight and talk through your options.
-
Yes. We coat standing-seam, R-panel, and other exposed-fastener metal roofs on homes, barns, shops, and commercial buildings.
-
Coating seals the common leak points on metal roofs — seams, fastener heads, and flashing. If your leak is coming from those spots, coating shuts it down. We'll find the source during inspection and tell you if coating will fix it.
-
That's what the inspection is for. If your panels are solid and the issues are rust, leaks at fasteners, or a worn finish, coating is usually the answer. If panels are damaged or rusted through, we'll tell you and talk about other options. You'll get a straight recommendation either way.
Get Your Free Metal Roof Coating Estimate
If your metal roof is showing rust, leaks, or a worn-out finish, let's take a look. Call Bryer and Sons at 1-800-385-8598 — we're available 7am–8pm — or fill out the form below and we'll call you back shortly.
No pressure, no obligation. Just a straight answer on what your roof needs and a free estimate.